How polishing granite stone
نوشته شده توسط : cheapweddingdresses

In the natural stone floors all materials, granite is by far the most hard, the wear-resisting material. At the same time it also has anti pollution and acid proof alkaline. This is why it can be used as kitchen countertops and flooring materials.

 

Although the granite is hard, but it can still be quartz scratch. The sole into the interior of the sand, the main ingredient is bridge saws. People walk crushed grains of sand, make it into smaller particles, particle pressure to the granite surface will cause slight scratches. The influence of the scratch on granite is far less than the effect of marble, although small, but there are scratches. Repair care can correct to reduce this damage. Methods nursing granite floor is typically dusted daily flow of people, according to one to two times a week cleaning floor. Use soap when washing stone. Re sealed floor, keep the floor color. Then by the wet dust, clean with clear water floor also called wet dust, can prevent water stains.

 

Once a week or every few Monday time, depending on the floor of the people flow. Can eliminate the minor scratches, repair of high flow area becomes dull gloss on the floor. Every available grinding agent and with stainless steel wire of low frequency buffer polishing pad.

 

If there is to do this step, then the granite luster can keep more durable.

 

If you ignore the floor care, improper cleaning, it will slowly fade, the scratch will become obvious, increasing the dim effect. If this is the marble floor, the scratch will be greater, you may need to change the floor. Use polishing machine and diamond grinding agent can restore luster. But the two time the grinding of granite with a very low success rate. It can become luster diamond technology re grinding to make, but a lot of times granite color will change, this is clearly not acceptable to the customers.

 

Re grinding, if it is marble, 30 minutes of a square meter, granite, due to the relatively hard, need about 2-3 hours.

 

In the processing factory, marble about 40 minutes to reach the high gloss polishing effect. While the granite required several hours to get the same effect. Once the granite situation appears to have no way, this method can only.

 

Therefore, if you have a granite floor, but has faded, it can ask someone to grinding restore its luster, don't trouble. But although the floor shiny restored, but change, but also cost you a penny, so be careful maintenance, do not have this problem appeared.

 





:: برچسب‌ها: bridge saws ,
:: بازدید از این مطلب : 297
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : چهار شنبه 16 مهر 1393 | نظرات ()
مطالب مرتبط با این پست
لیست
می توانید دیدگاه خود را بنویسید


نام
آدرس ایمیل
وب سایت/بلاگ
:) :( ;) :D
;)) :X :? :P
:* =(( :O };-
:B /:) =DD :S
-) :-(( :-| :-))
نظر خصوصی

 کد را وارد نمایید:

آپلود عکس دلخواه: